Turn Regional Regulatory Change into Business Advantage
Our approach
UAE Federal Decree-Law No. 11
EU CBAM readiness
Our service Ecosystem
Both regulations rely on the same foundation: reliable, auditable emissions data. A single, well-built carbon accounting system can serve your national reporting duties and your export obligations at once.
4 Strategic Pillars to Build Your Sustainable & Compliant Model
One Apave partner for your entire sustainability journey *
*Tailored expertise, total independence: clear separation of our advisory and certification services to ensure uncompromising trust
Rather than addressing compliance through disconnected vendor silos, Apave delivers a 360° technical response aligned with your primary strategic and operational challenges.
1. Decarbonization & Carbon Accounting: From Data Measurement to Science-Based Reduction
Navigating the transition to a low-carbon economy requires absolute data integrity. Organizations face increasing pressure from international supply chains, regional regulators, and financial institutions to measure, disclose, and actively reduce their carbon footprint.
- Audit-Ready Corporate Carbon Footprint (Aktio Platform): Powered by Aktio (an Apave Group company), we combine senior climate advisory with a dedicated SaaS carbon accounting platform. We guide you through complex Scope 1, 2, and 3 emissions calculations aligned with the GHG Protocol and ISO 14064-1 standards. The Aktio platform automates data collection across complex supply chains, allowing you to model reduction scenarios, track KPIs, and produce auditable reports.
- Product Carbon Footprint & Life Cycle Assessment (LCA): Quantify the environmental impact of your products from raw material extraction to end-of-life. We perform comprehensive LCAs to support environmental product declarations (EPDs) and satisfy eco-design requirements.
- Decarbonization Trajectories & SBTi Alignment: Define actionable, science-based reduction targets aligned with SBTi (Science Based Targets initiative) and ACT (Assessing low-Carbon Transition) methodologies. We bridge high-level corporate ambitions with engineering-backed decarbonization roadmaps for industrial facilities.
- Asset Energy Sobriety & Efficiency: Identify energy loss, optimize industrial utility systems (HVAC, steam, compressed air, process heat), and conduct energy audits compliant with local regulations and ISO 50001 energy management systems.
Ready to Measure and Reduce Your Corporate Carbon Footprint?
Get a look at our Aktio platform!
2. Environmental Risk Management & Resource Preservation: Securing Operational Continuity
Industrial Risk & Safety Engineering
To ensure operational continuity, extend asset life, and meet international safety benchmarks equivalent to European SEVESO directives, Apave delivers comprehensive engineering and risk management packages for high-risk industrial operating sites. As a trusted technical partner, Apave has successfully delivered nearly 621 comprehensive HSE studies since 2007, supporting major industrial and energy leaders across their critical infrastructure lifecycle:
- HSE Studies & Process Safety Engineering: We conduct rigorous process hazards analyses and safety design assessments, including HAZID, HAZOP, SIL determination/verification, Quantitative Risk Assessments (QRA), Fire & Explosion Risk Assessments (FERA), Building Risk Assessments (BRA), Fire & Gas (F&G) mapping, ATEX explosion risk studies, emergency response planning (Internal Emergency Plans / POI), and full Health, Safety, and Environmental Impact Assessment (HSEIA) packages.
- Asset Integrity & Reliability Engineering: Optimize performance, prevent unplanned downtime, and extend infrastructure lifespan with engineering studies covering Risk-Based Inspection (RBI), Reliability, Availability, and Maintainability (RAM), Reliability-Centered Maintenance (RCM), Asset Life Extension (ALE), Criticality Assessments, Spare Parts Optimization, and Preventive Maintenance (PM) optimization.
- Corrosion Management & Materials Assurance: Safeguard assets against severe degradation through Corrosion Management Plans (CMP), Corrosion Risk Assessment Studies (CRAS), Material & Corrosion Audits, Fitness-for-Service (FFS) evaluations, Remaining Life Assessments (RLA), and Pipeline Integrity Management, including Internal and External Corrosion Direct Assessments (ICDA/ECDA).
Precision Environmental Measurements (Air, Water, Soil, Noise)
- Air Emissions & Quality: Stack emissions testing, Continuous Emission Monitoring System (CEMS) verification, volatile organic compound (VOC) detection, and ambient air quality monitoring.
- Water Quality & Effluent Management: Industrial wastewater characterization, process water monitoring, and discharge compliance testing to protect regional water bodies.
- Contaminated Land & Soil Delineation: Phase I and Phase II environmental site assessments (ESA), soil contamination mapping, risk-based corrective action plans, and land remediation monitoring.
- Acoustic & Vibration Impact: Environmental noise mapping, industrial boundary noise measurements, and structural vibration analyses to minimize community disturbance.
Circular Economy & Waste Management
Optimize material flows through waste generation diagnostics, contaminated soil management, materials-waste audits (PEMD), and legal end-of-waste status attestations.
Protect your assets from regulatory non-compliance and avoid costly operational delays
3. ESG Disclosure, Certification & Regulatory Compliance: Building Stakeholder Trust
- Independent Third-Party ESG Verification (OTI Role): As an accredited Organisme Tiers Indépendant (OTI) in France, Apave provides official third-party verification for mandatory sustainability reports (CSRD). Drawing on this audit expertise, we also deliver independent ESG verification and assurance for voluntary frameworks and international disclosures outside the accredited scope. We ensure your ESG disclosures comply with global frameworks, including CSRD (Corporate Sustainability Reporting Directive), VSME, GRI, and CDP, as well as regional Middle Eastern taxonomy frameworks.
- We ensure your ESG disclosures align with major global and regional standards, including CSRD, VSME, GRI, CDP, and Middle Eastern taxonomy frameworks. As an official EcoVadis Core Consulting Partner, Apave offers expert guidance to optimize your ESG performance and sustainability ratings, backed by our specialized local teams in Europe and the Middle East (including Apave Abu Dhabi).
- Management Systems Certification: Strengthen your operational governance through accredited certification delivered by Apave Certification, supported locally in the region by Apave in Oman.
- ISO 14001: Environmental Management Systems.
- ISO 50001: Energy Management Systems.
- ISO 45001: Occupational Health and Safety Management.
- ISO 22301: Business Continuity Management.
- Responsible Supply Chain & Procurement: Assess vendor sustainability practices and implement responsible purchasing frameworks
4. Human Safety, Competency & Digital Trust: Empowering People and Securing Systems
A successful sustainability and compliance strategy relies on two fundamental pillars: skilled, safety-conscious personnel and secure, resilient digital infrastructure.
Workforce Upskilling & Transition Education:
- Enterprise-Wide Environmental Acculturation (Apave Climate School): Scalable corporate e-learning modules designed to train 100% of employees and leadership on climate, biodiversity, and sustainable transition issues. Features specialized learning paths, including Net Zero School for high-emission industrial sectors and Green HR for human resource leaders.
- Technical & Regulatory Qualifications: Certified technical training covering electrical safety, high-pressure equipment handling, working at heights, ATEX/DSEAR hazardous atmospheres, and chemical risk management to ensure operational safety on site.
Digital Confidence & Data Protection:
- Cybersecurity & Operational Technology (OT) Security: As industrial facilities become increasingly digitized, protecting SCADA and Industrial Control Systems (ICS) from cyber threats is essential to preventing catastrophic environmental or operational incidents. We conduct technical cyber diagnostics, penetration testing, and architecture audits thanks to 2 specialized structures : Apave Digital and Oppida.
- Data Privacy & Regulatory Compliance: Ensure your digital platforms, IoT sensors, and corporate data handling adhere strictly to global and regional privacy frameworks (GDPR and regional Middle Eastern Data Protection Laws).
Energy transition: safe, compliant and verifiable solar, wind and hydrogen projects
Renewable energy and green hydrogen infrastructure carry the Middle East's primary decarbonization ambitions. However, scaling clean energy assets requires more than capital investment—projects must be inherently safe, regulatory-compliant, and bankable for global lenders, regional authorities, and international off-takers.
By bridging technical inspection rigor with advanced sustainability verification, Apave supports energy developers, EPC contractors, and operators across the GCC through every phase of the energy transition.
Core Infrastructure & Energy Transition Solutions
- Solar PV Assets: Independent technical inspection, grid-compliance audits, and structural/electrical safety verification for utility-scale photovoltaic installations—from initial design review and commissioning to ongoing operation. Carbon footprint data and Life Cycle Assessments (LCA) are integrated via Aktio to strengthen your ESG reporting.
- Wind Energy Infrastructure: Third-party mechanical integrity inspections, turbine safety verification, and environmental compliance support, coupled with auditable sustainability reporting for wind farm developers.
- Hydrogen & Clean Fuels: High-hazard safety inspection, ATEX explosion risk management, and pressure vessel integrity testing for production, storage, and transport facilities. As green hydrogen exports to Europe fall under the EU Carbon Border Adjustment Mechanism (CBAM), Apave delivers independent GHG accounting and third-party verification required for international trade compliance.
- Oil & Gas Decarbonization: Helping conventional energy operators decarbonize upstream and downstream assets through fugitive emissions tracking (LDAR), flare reduction verification, energy sobriety audits, and carbon intensity measurement per barrel produced.
Planning a Renewable Energy or Hydrogen Project in the GCC?
Your questions regarding decarbonisation regulations and carbon accounting?
-
What does UAE Federal Decree-Law No. 11 of 2024 require from companies?It makes Scope 1 and Scope 2 emissions tracking mandatory, with penalty exposure of up to AED 2 million for non-compliance. Apave helps you set up a robust GHG inventory and prepare it for independent verification. You can read the official text of the Decree-Law.
-
Which GCC exporters are affected by the EU CBAM?Exporters in aluminium, iron & steel, cement, fertilisers and hydrogen face new cost and reporting requirements when selling into the EU. See the European Commission’s CBAM page for the official framework.
-
Does CBAM apply to hydrogen exported from the GCC?Yes. Hydrogen is one of the covered sectors, alongside aluminium, iron & steel, cement and fertilisers. Reliable, verifiable emissions data is essential to meet the reporting requirements.
-
Why is independent verification important?
Third-party verification ensures your sustainability and emissions data is fully credible for regulators, international customers, investors, and lenders. As an accredited Organisme Tiers Indépendant (OTI), Apave provides independent verification for your mandatory sustainability reports (CSRD) under COFRAC accreditation, as well as comprehensive assurance for your regulatory and voluntary GHG emissions disclosures.
-
What inspections do solar and hydrogen projects need?Requirements depend on the country and project type. Apave carries out independent inspection and safety verification of photovoltaic and hydrogen installations. Contact our team to define the scope for your project
-
Can you help renewable energy developers with ESG reporting?Yes. We combine technical inspection with carbon accounting, ESG advisory and independent verification.
-
Can Apave support us beyond carbon accounting?Yes. We cover environmental measurements, ISO certification, HSE training and workplace risk management, all under one partner.
-
How can we train our employees on climate and sustainability?Apave Climate School offers e-learning and hybrid training on climate, biodiversity and the sustainable transition for all employees, with specialised modules for high-emission sectors and HR leaders. Contact our team to define a programme adapted to your organisation.
Didn’t Find What You Were Looking For?
Our strengths
OUR CUSTOMER RELATIONSHIP APPROACH
OUR EXPERTISE
